CarrollTouch 4000S Serial Controller (Discontinued March 2006)

Specifications

• Technical

  ---

  Part Number(s)

  856310-000

  Technology

  CarrollTouch

  Number of Touches

  Single Touch

  Input Methods

  Finger
  Gloved hand
  Passive stylus

  Dimensions

  2.30" x 3.30" x 0.40" / 58.42 mm x 83.82 mm x 10.16 mm

  Interface

  EIA 232E (Serial RS-232), DCE configuration. 8 Data Bits, 1 Stop Bit, No Parity, Full Duplex
  Hardware handshaking: RTS/CTS
  DSR is pulled HIGH (>+3V) by the 4000S when connected and powered. DTR can be asserted by the host to interrupt the flow of data

  Surface Treatment

  Clear

  Resolution

  4096x4096

  Conversion Time

  Approximately 25 ms per coordinate set

  Baud Rate

  9600 (default)

  Construction

  Four-layer surface-mount design with internal ground plane for EMI suppression
  

  Flammability

  The printed circuit board substrate is rated 94V0. All plastic components, such as headers and connectors, are also rated 94V0.

  Shock and Vibration

  Three axis sine wave, 50 Hz to 2kHz, 1 G, 2 minutes/Octave with dwell on resonances

  Current - Operating Mode

  Full Infrared SmartSet protocol

  Operating Temperature

  -20°C to 70°C

  Storage Temperature

  -40°C to 85°C

  Humidity

  Operating: 0% to 95% RH, noncondensing
  Storage: 0% to 95% RH, noncondensing

  Altitude

  10,000 feet

  MTBF

  50,000 hours demonstrated

  Mounting Options

  All mounting holes are plated through for chassis ground connection

  Connectors and Pin Definitions

  The connector configuration permits the controller to be placed in-line between the touchscreen and serial I/O attachments.

  Controller Cables

  Contact Elo for more information.